Wireless Flash Trigger & 4 Receivers For Nikon SB900 SB-900

Wireless Flash

Wireless Flash Trigger & 4 Receivers For Nikon SB900 SB-900 SB800 & Many More!
by Neewer Electronics Accessories
Date first available at Amazon.com: April 12, 2010

Buy new: $36.99

(Ranking is updated hourly. Visit the Hot New Releases in Flashes list for authoritative information on this product’s current rank.) BUY IT

Product Description

4 channels with hot shoe connector for external flashes

Transmitter Power: 23A 12V battery (installed)

Receiver Power: 2 AAA Batteries

Maximum Working Distance: 30m (open area, without interference)

Operates on Frequency: 433MHz

Triggering life: up to 20,000 times

Compatible with:

Canon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EZ,
430EX, 430EX II, 420EX, 420EZ, 380EX

Nikon SpeedLite SB900, SB-800, SB-600, SB-28, SB-27, SB-26,
SB-25, SB-24

Olympus FL-50R, FL-50, FL-36R, FL-36

Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT

Sigma EF-530 DG Super, EF-500 DG Super, EF-430

Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AF, 344D, 333D

Vivitar 285HV, DF-400MZ, DF-340MZ, 2700

Other flash models with a trigger voltage of 12V or lower

It can be mounted on the hot shoe of the camera or connected to the PC socket of the camera with the cord supplied. Using a PC socket connection (if your camera has one) allows simultaneous use of a hot shoe-mounted flash unit and off-camera flashes with this set. There’s a test button on the top of the transmitter for test firing. The transmitter is powered by a small 12V alkaline battery.

It has a mounting bracket which fits into a traditional flash stand, with a ¼-20 threaded hole for mounting on a light stand or tripod. An adjusting knob allows the receiver to tilt on the bracket, with detents at straight up and 45 degree forward and backward positions (It can be tightened in any position +/- 90 degrees from vertical). There’s a hot shoe for mounting a flash unit on the top of the receiver, and there’s a small on/off switch and a small LED light on the front of the unit. The back of the receiver snaps off to reveal the battery compartment and two dip switches for channel selection. It is powered by 2 AAA batteries .

100% brand new. 1 year warranty.

Technical Details

– Wireless Trigger with 4 Receivers for FlashGun 4-Channel
– This wireless trigger offers discrete control over the hot shoe flashgun.
– Max. working distance: 30M (open area, without interference)
– Easy installation and low power consumption
– New design: Channel Selector outside the transmitter and the receiver

1 thought on “Wireless Flash Trigger & 4 Receivers For Nikon SB900 SB-900

Comments are closed.